Menu
Menu
Tournament Strong's

6qt Single Injector Mount

6qt Single Injector Mount

Just released Genuine Tournament Strong single injector mount. Designed to be used with Tournament Strong’s 6qt stirrers both standard and Monster. The clamp is made for a 1 1/2 inch injector tube. Allows you to leave your single injector in your hot plastisol so you don’t have to clean it out after every shoot (Huge time saver). Comes with injector clamp, mount and a twin paddle. If you have a buddy you can have one on each side. Really speeds up production!!!

$55.00

24 in stock

Categories , , , , , , Tag

Description

Just released Genuine Tournament Strong single injector holder. This product allows you to keep your injector in your hot plastisol the whole time you are shooting plastic (No more cleaning after every shoot). Designed and made to be used with Tournament Strong’s Combos, twins or anyone using a Tournament Strong 6qt standard or Monster stirrer. The injector should be 1 1/2 inches in diameter. There are (2) set screws that allow you to mount it on to the side of the stirrer. There is a clamp that goes onto your injector to set your depth. (“Don’t over tighten anything”) It also comes with a stirring paddle designed to allow you to get as much depth as possible. Your injector will be approximately 1/2 inch from the bottom of your pot. In reality your plastisol is heated, your stirrer is mixing and your injector is sitting in your plastisol being preheated to the same temperature as your plastic so it flows out of your injector real smooth. Once you are finished and everything is unplugged wait until your injector is cool before cleaning it out. Spray it down with worm oil and you are good to go. Everything Tournament Strong makes is to improve quality and more importantly save you time.

Additional information

Weight 1 lbs
Dimensions 9 × 6 × 2 in

Related products

Well, this is how Tournament Strong all came about. My name is Randy Ipsen, I am a habitual bass angler.

Explore Us

Menu

Contact Info

ipsenconnect@mail.com
Facebook-f Instagram

Well, this is how Tournament Strong all came about. My name is Randy Ipsen, I am a habitual bass angler.

Explore Us

Home

FAQS

Contact Info

ipsenconnect@mail.com
Copyright © 2023 Queens Creative Design | All rights reserved.
Terminal

These are 1/4 oz Scrounger heads under used but super easy to use. Add them to just about any bait. Wide wobble action entices the big ones even giant panfish

Shop now
Accessories

Tournament Strong has their “TS Twin injector handle” with several necessities on their way including heat gloves single injector handles and possibly temperature guns.

Shop now
Europe

The stirrers and pots that Tournament Strong produces or modifies will be available for the European markets. As soon as they are available, they will be posted on the website. Thank You for your patients.

SHOP NOW

TWINS
STIRRERS
ACCESSORIES
COMBOS
Australia

The stirrers and pots that Tournament Strong produces or modifies will be available for the Aussie market. As soon as they are available, they will be posted on the website. Thank You for your patients.

SHOP NOW

TWINS
STIRRERS
ACCESSORIES
COMBOS
TS Twin Handle

These handles are CNC machined and CNC formed and are anodized our signature Tournament Strong “Orange”. These handles fit twin injectors with the injector tubes being 1-1/2″ in diameter and 2″ between the injector tubes. The holes in the handle are 1-3/8″ diameter.

Shop now
STIRRERS

Introducing Tournament Strong Stirrers: Designed to Protect Your Plastisol and Prolong Motor Life

Our stirrers are specifically designed to prevent your plastisol from scorching to your presto pots. We understand the importance of keeping heat away from the motor, and our innovative design incorporates various precautions to achieve this. We use heat absorbing composites between the pot and motor mount, as well as between the hot plastisol and the motor. Our motors are custom-produced for Tournament Strong, with a focus on high torque and longevity.

Our 8qt, 10qt, and 6qt Monster stirrers are all equipped with larger super high torque motors, providing powerful performance for your stirring needs. Additionally, all of our stirrers are completely speed controlled, allowing you to adjust the stirring speed according to the liquid level in your pot. It’s vital to slow down the stirring speed as the liquid level decreases to prevent introducing air into your plastic.

To ensure compatibility with your presto pot, we offer stirrers that fit specific presto pot models. Our 6 quart stirrers fit presto pot model #0600611, while our 8 quart stirrers fit presto pot model #0600812, and our 10 quart stirrers fit presto pot model #0600913. For those who need even more power, our 6 quart Monster motor stirrers are also designed to fit presto pot model #0600611.

Invest in Tournament Strong Stirrers for reliable and efficient plastisol stirring, with a focus on motor protection and durability. Upgrade your plastisol stirring experience with our high-quality stirrers and enjoy peace of mind knowing your plastisol and motor are well taken care of.

Shop now
COMBOS
Introducing Tournament Strong Combos: Our combos start with tried and true 6qt Presto Pot (Model #0600611)
 
There are (2) different options when it comes to our combos. Our Complete combo is equipped with a ball valve (spigot) threaded into the bottom of the pot. With a lot of makers the spigot is useful in producing open pour molded baits. Personally, I have to change colors quick. I will drain my pot(s) onto shallow cookie sheets and once cooled I can cut into strips with a pizza cutter for easy remelting. This combo comes complete with billet aluminum feet designed for easy mounting or clamping to the edge of your bench. Combo contains: Presto pot, Signature speed controlled stirrer, Billet feet and the temperature controller.
 
Our Mid Combo has everything the Complete combo has minus the spigot and the aluminum feet (not necessary). This is the first step into being able to produce a lot of baits in a short amount of time. Most of the newer makers have been dependant on using a microwave. Imagine having enough plastic to shoot all of your molds over and over again. If you just smiled, one of these combos is for you.

These combos have been staples for a lot of big swimbait makers. Some of those big swimbait makers use up to 6 Combos (representing 6 different colors) in a production line-style setup for efficiency and streamlined production.

Invest in Tournament Strong Combos for value and a complete and efficient setup for your plastisol production. Our pots and signature stirrers, along with the added convenience of the spigot and aluminum legs, will enhance your workflow and productivity, making it easier to change colors and create quality baits.
Shop now
TWINS

Introducing our Bare Twins, designed to enhance production of two-color baits! Our innovative product allows you to connect two 6-quart Presto pots (model #0600611) with our signature stirrers and your twin injector, with 2 inches of space between injectors and a 1-1/2 inch diameter. Once assembled, you can conveniently leave your twin injector in your hot plastic while your stirrers continue to stir.

After shooting all your molds, simply squeeze any remaining plastic back into the pots and leave your injector in the plastic. Strip your blending block, demold your baits, and you’re ready to do it all over again! We understand that time is money, so we also offer a “Complete Twin” option for professionals who want to save time and get started quickly. The Complete Twin comes with two 6-quart pots, two of our signature speed-controlled stirrers, all linked together and ready for you to add your favorite plastisol and drop your twin injector on top. It comes fully assembled, so you can start producing two-color baits right away!

Invest in our Twins and experience increased production and efficiency in your bait-making process. With our innovative design and quality components, you’ll be able to save time, reduce waste, and create high-quality two-color baits with ease. Join our community of satisfied customers and take your bait-making game to the next level with our Bare Twins or Complete Twin options.

Introducing our Twins. Bare, Mid and Complete twins, all designed to enhance production of making two-color baits! The only thing you will need is your own twin injector. The injector tubes should be 1-1/2″ in diameter and 3-1/2″ center to center. Our innovative design allows you to either connect two 6-quart Presto pots (model #0600611) with our Bare Twin. For the makers who want to start mass producing right away, we offer 2 options.
 
Our Mid Twin starts with (2) 6qt Presto pots assembled with a Bare Twin and combined with (2) of our signature stirrers. Or if you have use for ball valves on your pots you will want to take a close look at our Complete Twin. Some of the benefits of having the valves on the bottom of your pots are for those makers that use open pour molds or if you change colors a lot and would like to drain your pot onto cookie sheets for making strips for easy remelts. 
 
After shooting all your molds, simply squeeze any remaining plastic back into the pots and leave your injector in the plastic. Strip your blending block, demold your baits, and you’re ready to do it all over again! 

Some of the reasons makers like our twins, is the price, how portable the complete unit is (you can carry it with one hand). Some of the people who have purchased range from the novice to the seasoned makers. Touring professional anglers, tackle shop owners and a boat load of makers who are tired of paying too much for soft plastic baits.

Shop now