We’ve compiled some of the most common questions and answers to help you get the information you need. If you have any additional questions, feel free to contact us, and we’ll be happy to assist you further.
I mix my plastisol 15-30 minutes (well mixed, no lumps). Measure how much plastic I'm going to use. Pour it in the pot and turn the thermostat to 375, at that time I set my stirrer on medium or higher (depending on depth of plastisol). Once your plastic goes completely clear turn down your thermostat to 310-325. I add my color and glitters (magic) never turning off my stirrer. 5 minutes and you are ready to start shooting.
A presto pot should not be used without a stirrer. The stirrer keeps your plastisol from scorching to the pot. Once you scorch your pot it is never the same. You will scorch there every time. If you use salt or a lot of glitters to have to keep it suspended, the only way is a stirrer.
Rule #1 do not spin your stirrer fast enough to introduce air into your plastisol. As your plastic gets lower in your presto pot you may have to turn your speed down.
You will need a twin injector. Dimensions for twin injectors: 2 inches between injectors each injector should be 1-1/2 inches round (Basstackle).
There are a few makers who use salt water plastic with hardener. (like trying to mix clay). Monster motor has a lot of torque!
Well, this is how Tournament Strong all came about. My name is Randy Ipsen, I am a habitual bass angler.
Well, this is how Tournament Strong all came about. My name is Randy Ipsen, I am a habitual bass angler.
These are 1/4 oz Scrounger heads under used but super easy to use. Add them to just about any bait. Wide wobble action entices the big ones even giant panfish
Tournament Strong has their “TS Twin injector handle” with several necessities on their way including heat gloves single injector handles and possibly temperature guns.
The stirrers and pots that Tournament Strong produces or modifies will be available for the European markets. As soon as they are available, they will be posted on the website. Thank You for your patients.
The stirrers and pots that Tournament Strong produces or modifies will be available for the Aussie market. As soon as they are available, they will be posted on the website. Thank You for your patients.
These handles are CNC machined and CNC formed and are anodized our signature Tournament Strong “Orange”. These handles fit twin injectors with the injector tubes being 1-1/2″ in diameter and 2″ between the injector tubes. The holes in the handle are 1-3/8″ diameter.
Introducing Tournament Strong Stirrers: Designed to Protect Your Plastisol and Prolong Motor Life
Our stirrers are specifically designed to prevent your plastisol from scorching to your presto pots. We understand the importance of keeping heat away from the motor, and our innovative design incorporates various precautions to achieve this. We use heat absorbing composites between the pot and motor mount, as well as between the hot plastisol and the motor. Our motors are custom-produced for Tournament Strong, with a focus on high torque and longevity.
Our 8qt, 10qt, and 6qt Monster stirrers are all equipped with larger super high torque motors, providing powerful performance for your stirring needs. Additionally, all of our stirrers are completely speed controlled, allowing you to adjust the stirring speed according to the liquid level in your pot. It’s vital to slow down the stirring speed as the liquid level decreases to prevent introducing air into your plastic.
To ensure compatibility with your presto pot, we offer stirrers that fit specific presto pot models. Our 6 quart stirrers fit presto pot model #0600611, while our 8 quart stirrers fit presto pot model #0600812, and our 10 quart stirrers fit presto pot model #0600913. For those who need even more power, our 6 quart Monster motor stirrers are also designed to fit presto pot model #0600611.
Invest in Tournament Strong Stirrers for reliable and efficient plastisol stirring, with a focus on motor protection and durability. Upgrade your plastisol stirring experience with our high-quality stirrers and enjoy peace of mind knowing your plastisol and motor are well taken care of.
Introducing our Bare Twins, designed to enhance production of two-color baits! Our innovative product allows you to connect two 6-quart Presto pots (model #0600611) with our signature stirrers and your twin injector, with 2 inches of space between injectors and a 1-1/2 inch diameter. Once assembled, you can conveniently leave your twin injector in your hot plastic while your stirrers continue to stir.
After shooting all your molds, simply squeeze any remaining plastic back into the pots and leave your injector in the plastic. Strip your blending block, demold your baits, and you’re ready to do it all over again! We understand that time is money, so we also offer a “Complete Twin” option for professionals who want to save time and get started quickly. The Complete Twin comes with two 6-quart pots, two of our signature speed-controlled stirrers, all linked together and ready for you to add your favorite plastisol and drop your twin injector on top. It comes fully assembled, so you can start producing two-color baits right away!
Invest in our Twins and experience increased production and efficiency in your bait-making process. With our innovative design and quality components, you’ll be able to save time, reduce waste, and create high-quality two-color baits with ease. Join our community of satisfied customers and take your bait-making game to the next level with our Bare Twins or Complete Twin options.
Some of the reasons makers like our twins, is the price, how portable the complete unit is (you can carry it with one hand). Some of the people who have purchased range from the novice to the seasoned makers. Touring professional anglers, tackle shop owners and a boat load of makers who are tired of paying too much for soft plastic baits.